The formal, approved definition of the REFEDS Research and Scholarship (R&S) Entity Category is published on the REFEDS website:
(Note that the URI value of the REFEDS entity attribute resolves to the R&S specification.)
Advice from federation operators that have already implemented R&S is available. REFEDS has also prepared guidance on the legal justification for R&S and a presentation that can be reused for local training (cf. training material from the Attribute Release Workshop for Federation Operators, TNC2015). If you would like help to provide training for your members please do not hesitate to contact us.
Please either contact your local Federation Operator or the REFED Steering Committee (email@example.com). The REFEDS SC has a process in place for reviewing such complaints and working with Federation Operators to address.
The category definition says that:
Candidates for the Research and Scholarship (R&S) Category are Service Providers that are operated for the purpose of supporting research and scholarship interaction, collaboration or management, at least in part.
Example Service Providers may include (but are not limited to) collaborative tools and services such as wikis, blogs, project and grant management tools that require some personal information about users to work effectively. This Entity Category should not be used for access to licensed content such as e-journals.
Broadly this means that R&S is intended for platforms and services used by researchers or scholars where some sort of collaboration, discussion or other interaction between users is required, making the release of personally identifiable information necessary for the service to work properly. This services may be both paid for or freely available services - the focus of the category is on the nature of the service offering and legitimate requirements for attributes.
Think about issues like:
As a federation, you should be satisfied that the release of personal data is an essential part of the operation of the service (and not purely to activate added features) and that the service in question, whether commercial or not, exists to support research and scholarship as a primary function.
Services that should not be included in this category include:
Collaboration is a sufficient condition for inclusion in the R&S category. Thus a service that functions as a collaborative tool (at least in part) meets the intent of this category.
A wiki is probably the most obvious example of a collaborative service. Other examples include (but are not limited to): calendaring and scheduling tools, content and document management systems, and mailing list software.
Scientific research (broadly defined) is inherently a collaborative endeavor, and so web apps, portals, and computational tools for researchers clearly satisfy the intent of R&S. Collaborative learning platforms for research or education are also candidates for the R&S category.
An important characteristic of collaborative tools and services is that they require the user’s name to function effectively. Hence, the R&S attribute bundle includes a name-based identifier (
eduPersonPrincipalName) and person name as essential attributes. The user’s email address is also included in the bundle, to facilitate communication among the users of the service and between the service and its users.
The following REFEDS R&S requirement:
4.3.1 The Service Provider is a production SAML deployment that supports SAML V2.0 HTTP-POST binding.
may be interpreted as the following pair of requirements:
The Service Provider supports standard SAML V2.0 Web Browser SSO. In particular, the Service Provider has an endpoint in metadata that supports the SAML V2.0 HTTP-POST binding.
The Service Provider is a production deployment or one of a group of services that together comprise a production deployment.
The latter includes dev and/or staging instances of the overall Service Provider deployment.
Service Providers should only request attributes that the service actually uses. The specification does not explicitly prevent Service Providers from requesting attributes outside the R&S attribute bundle. R&S works best for both Identity Providers and Service Providers when the bundle is treated as the maximal set of attributes requested. The specification gives the following advice:
Service Providers SHOULD limit their data requirements to the bundle of attributes defined in Section 5, but MAY negotiate for additional data as required via mechanisms that are outside the scope of this specification.
The category specifies "SHOULD" so as to not unintentionally disallow scenarios where there is a very good reason to ask for an extra attribute, although providers are encouraged to stick to the R&S bundle where-ever possible. An example exception might be where a contractual arrangement exists and specific attributes (e.g. eduPersonEntitlement) are used to help flag this contractual arrangement.
That said, if an SP requests an attribute outside the R&S attribute bundle, an IdP that supports R&S is by no means required to release it.
Release of data from organisations is governed by data protection laws that provide a variety of mechanisms to ensure that people and organisations have choice over the data that is released. R&S is designed to safely and securely release appropriate and required data and all IdPs are encourage to release requested attributes. There may however be legitimate reasons for attributes not be release (e.g. user consent, data not available for all users in IDM systems etc.). SPs are encouraged to consider providing helpful error message screens where this may impact service provision.
Service Providers should reference the eduPerson specification for details on values that may be received per attribute, but in general terms:
The Research & Scholarship specification defines a bundles of attributes that Identity Providers supporting R&S must release to R&S services:
The bundle also includes one optional attribute (everything else above being mandated by the specification):
Service Providers should therefore be prepared to not receive affiliation attributes under R&S, due to their optional nature.
Affiliations in the form of eduPersonScopedAffiliation attribute values have long known to be not widely interoperable (REFEDS Whitepaper, A.Cormack, M.Linden, 2009) particularly in cross-institutional, cross-cultural or international uses. (As pointed out in the conclusion of said whitepaper affiliations are also unsuitable for most kinds of authorization use-cases, them being too "high level"). For these reasons their use within R&S is not emphasized or recommended.
Category support is defined as follows:
An Identity Provider indicates support for the R&S Category by exhibiting the R&S entity attribute in its metadata. Such an Identity Provider MUST, for a significant subset of its user population, release all required attributes in the bundle defined in Section 5 to all R&S Service Providers, either automatically or subject to user consent or notification, without administrative involvement by any party.
Section 7 of the Entity Category gives details of how IdPs should implement support. Effectively managing use of eduPersonPrincipalName and eduPersonTargetedID in relation to reassignment is one of the areas that causes the most confusion. For the avoidance of doubt, REFEDS recommends that if you support both, release both.
To release attributes to all current and future R&S SPs with a one-time configuration, an IdP leverages entity attributes (instead of entity IDs). Thus the configuration steps documented in the R&S IdP Config topic require Shibboleth IdP v2.3.4 or later, which fully supports using entity attributes in SP metadata as part of an attribute release filter policy. No other SAML IdP software is known to support entity attributes at this time.
IdPs are broadly taking one of two approaches to releasing attributes to R&S SPs:
<md:RequestedAttribute>elements in SP metadata.
The short answer is no. An IdP must release attributes to all R&S SPs before it can assert the REFEDS R&S entity attribute in metadata.
Consider, for example, an IdP that releases the minimal subset of the R&S attribute bundle to any SP that is a member of both the Code of Conduct category and the Research & Scholarship category. That IdP is not eligible to receive the REFEDS R&S entity attribute in its metadata.
As another example, consider an IdP that releases the minimal subset of the R&S attribute bundle to any R&S SP in the InCommon Federation (but no other federation). That IdP may not receive the REFEDS R&S entity attribute in its metadata.
Finally, consider the following counterexample. Suppose an IdP releases the minimal subset of the R&S attribute bundle to any R&S SP provided the user is a non-student. That IdP may indeed receive the REFEDS R&S entity attribute in its metadata since it supports the R&S category "for a significant subset of its user population," as required by the REFEDS R&S specification.
Some tips and suggestions for implementing the Research & Scholarship Category are given in a separate document. There is also guidance and advice on attribute release and a useful seven step programme that could be used when adding service providers to an entity category.
The GÉANT Data Protection Code of Conduct is a process that allows Service Providers to commit to a series of declarations of support for data protection within the context of the EU Data Protection Directive. Like R&S, it results in the application of an entity category tag and is intended to give greater confidence to IdPs when releasing data.
This can be determined using the entities search on https://met.refeds.org/.